RCA 608WL - Manual (Page 133)

Chapter 5
Expert Configuration
E-DOC-CTC-20041126-0013 v1.0
131
5.2.9 SLA
Overview The Service Level Agreement (SLA) page allows you to view and configure ping and
traceroute tests.
The page contains two sections:
 Select
Ping
to view/configure and perform ping tests.
 Select
Traceroute
to view/configure and perform traceroute tests.
Ping The Ping table provides a list of configured ping test entries.
By default no ping tests are configured. To add a ping test see
Add/delete a ping
test .
Per Ping test entry following information is shown in the table:
 An intuitive Test name of the ping Test
 The ping test entry Owner
 The ping Target Address (host or IP address)
 The ping test Status, being either:
 Stopped
 In Progress
Select a ping test entry to:
 Modify ping test properties .
 Perform a ping test and view test results and history (see Ping tests and
results ).
 Delete the entry (see Add/delete a ping test ).
Add/delete a ping test To add a ping test entry:
1 Click New (if an entry is currently selected, click Cancel first).
2 Type a name for the ping test entry.
3 Type the host name or IP address of the target to ping.
4 Click Apply.
To delete a ping test:
1 Select the ping test entry to delete.
2 Click Delete.