Introduction, Procedure, From a remote server – RCA 608WL User Manual
Page 210: 1 embedded, 1 embedded update page, Chapter 7
Chapter 7
Software Upgrade
E-DOC-CTC-20041126-0013 v1.0
208
7.1 Embedded Update Page
Introduction
This procedure is OS independent and supports roll-back scenarios. Your
SpeedTouch™ provides storage room for two system software packages: the active
system software the SpeedTouch™ is currently running and a passive package. A
switchover from the one package to the other can be performed.
Procedure
Proceed as follows:
1
Go to the embedded web pages.
2
In the menu select SpeedTouch > Update.
3
Choose a way to update your SpeedTouch™. This can be done:
From a remote server
You can upgrade your SpeedTouch™ from a remote server.
1
Click Check For Updates.
2
In the Pick a task... list, click Update software.
3
The new software is retrieved and stored on the SpeedTouch™, remembering
the current configuration and connection states. Your SpeedTouch™ will
automatically restart and restore the connections.
4
At the end of the procedure, the SpeedTouch™ returns to the Home page.
This procedure enforces you to upgrade right away, disconnecting all
connected devices.