RCA 608WL - Manual (Page 46)

Chapter 3
Internet Connectivity Dial-In Clients
E-DOC-CTC-20041126-0013 v1.0
44
Embedded PPP dial-in
clients
The SpeedTouch™’s embedded PPP dial-in client allows you to establish an Internet
connection for computers residing on your local network, using only one computer of
the network to control the client.
If this computer runs:
 MS Windows XP
you can use MS Windows XP’s Internet Gateway Device Control Client.
See
“3.1 IGD Control Agent” on page 45 to proceed.
 Another Operating System
you can use the SpeedTouch™ web pages.
See
“3.2 SpeedTouch™ Web Pages” on page 47 to proceed.
Broadband host PPPoE
dial-in clients
You can also connect to the Internet using a Broadband PPPoE dial-in application.
The PPP over Ethernet connection scenario provides PPP-like dial-in behaviour over
the virtual Ethernet segment.
To be able to use a broadband dial-in application on your computer for connecting to
the Internet, the SpeedTouch™ needs to be configured for Bridged Ethernet or Routed
PPPoE (with PPPoE relay) via the SpeedTouch™ Setup wizard or the embedded Easy
Setup.
If this computer runs:
 MS Windows XP
you can use the MS Windows XP broadband dial-in client. See
“3.3 MS
Windows XP BroadBand Connection” on page 49 for more information.
 Mac OS X
you can use a Mac OS X broadband dial-in client. See
“3.4 Mac OS X PPPoE
Dial-in Client” on page 53 for more information.
- or -
 A broadband PPPoE dial-in client provided by your Service Provider to connect
to the Internet
Upon availability of OS-specific PPPoE dial-in client applications, the
latter method is Operating System independent.
For PPPoE session connectivity from a Mac OS 8.6/9.x, an MS
Windows 95/98(SE)/ME/2000 or a Linux system, a host PPPoE dial-in
application is mandatory.