RCA 608WL - Manual (Page 209)

Chapter 7
Software Upgrade
E-DOC-CTC-20041126-0013 v1.0
207
7 Software Upgrade
Introduction This chapter describes how to upgrade the SpeedTouch™ system software or
firmware.
System software
upgrades availability
For the availability of new system software version packages you can:
 Click the SpeedTouch Maintenance link, available on the Setup CD menu.
 Go to the embedded Update page.
 Check for SpeedTouch™ upgrades at http://www.speedtouch.com/.
System software
packages and security
All system software packages for the SpeedTouch™ are digitally signed and
encrypted. Packages that may have become corrupted, or been altered in any way,
will not be accepted by the SpeedTouch™.
This way the SpeedTouch™ or its service can never be corrupted or lost.
System software
upgrades
Depending on the Operating System your computer is running, you can upgrade your
SpeedTouch™ via:
 The SpeedTouch™ Update page (all Operating Systems); see “7.1 Embedded
Update Page” on page 208 for more information.
 The SpeedTouch™ Upgrade Wizard (Microsoft Windows or Mac OS X); see
“7.2 Upgrade Wizard on Setup CD” on page 210 for more information.
 The SpeedTouch™ BootP client (all Operating Systems); see “7.3 Upgrade via a
BOOTP/TFTP Server” on page 213 for more information.
Preliminary steps Before you start with upgrading the SpeedTouch™, always make sure:
 To inform all people relying on the SpeedTouch™ services, that service may be
down for some short period.
 The new system software file is stored on your local disk or another storage
device.
! It is NOT possible to upgrade your SpeedTouch™ over a wireless connection.