Starting a broadband internet session, Terminating a broadband internet session, Chapter 3 – RCA 608WL User Manual
Page 56
Chapter 3
Internet Connectivity Dial-In Clients
E-DOC-CTC-20041126-0013 v1.0
54
Starting a broadband
Internet session
Proceed as follows:
1
Click the Internet Connect dockling.
2
The following window appears:
Make sure Built-in Ethernet
is selected in the Configuration list.
3
If needed, enter user name and password for your user account at the Service
Provider.
4
Click Connect.
5
As soon as the connection is established you can open your web browser and
surf the Internet.
Terminating a
broadband Internet
session
Proceed as follows:
1
Click the Internet Connect dockling.
2
The following window appears:
Make sure Built-in Ethernet
is selected in the Configuration list
3
Click Disconnect.
4
The connection is released. As a result no Internet connectivity exists anymore.
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet Connect.
If the Internet Connect dockling is not available, go to the Applications
folder on the system startup disk and double-click Internet
Connect
.