6 debug, Tear down all tunnels, Debug – RCA 608WL User Manual
Page 204: Chapter 5
Chapter 5
Expert Configuration
E-DOC-CTC-20041126-0013 v1.0
202
5.7.6 Debug
Status page
This page shows the status of the IKE Security Association (Phase 1) and the IPSec
Security Association(s) (Phase 2)
. For an operational VPN connection, both an IKE
Security Association
and an IPSec Security Association should be active.
Statistics page
This page shows the amount of traffic carried over the IKE Security Association
(Phase 1)
and the IPSec Security Association(s) (Phase 2).
Logging page
On the Logging page you can monitor the received and transmitted messages of the
IKE and IPSec negotiations.
Proceed as follows:
1
Browse to Expert mode > VPN > Debug > Logging.
2
Select the desired level of Trace Detail. Select high to see the most detailed
level of logging.
3
Start the VPN connection.
4
Browse again to Expert mode > VPN > Debug > Logging.
Tear Down All Tunnels
On this page you can halt all established VPN tunnels.