Roland VS-2480 - Manual (Page 247)

18—Editing Tracks
Roland VS-2480 Owner’s Manual www.rolandus.com 247
Editing with the TRACK EDIT Buttons
This section describes how to perform seven of the
most common track phrase and region edits using
the TRACK EDIT buttons, the cursor buttons, SHIFT
and the TIME/VALUE dial.
Placing Edit Points Using the IN, OUT, FROM and TO Buttons
To set edit points for the first time in a project using the VS-2480’s buttons:
1. Position the timeline at the desired location.
2. Press the IN, OUT, FROM or TO button.
3. To clear an edit point, hold down CLEAR and press the desired IN, OUT, FROM or
TO button.
Once you’ve set a project’s IN, OUT, FROM and TO points, their buttons can be
configured so that pressing an edit point’s button:
• moves the timeline to its position.
• resets the edit point to the current position of the timeline.
Configuring the Behavior of the IN, OUT, FROM and TO Buttons
1. Press UTILITY.
2. If “GLOBAL” doesn’t appear over F2, press PAGE until it does.
3. Press F2 (GLOBAL).
4. The EDIT POINT Sw TYPE parameter sets the behavior of the IN, OUT, FROM and
TO buttons for resetting your IN, OUT, FROM or TO edit points. You can choose:
•
Same as LOCATOR —so that pressing an edit point’s button moves the timeline
to the edit point’s location in the project.
• OVERWRITE —so that pressing an edit point’s button resets the edit point to the
current position of the timeline.
5. Press F6 (EXIT) to confirm your changes and to leave the GLOBAL Param1 screen.
Selecting a Track Using the VS-2480’s Buttons
1. Press or to move the cursor to the desired track.
Selecting Phrases and Regions with the VS-2480’s Buttons
To select a phrase:
1. Position the timeline so that it’s touching the desired phrase.
2. Press or to cursor to the track on which the phrase resides.
3. Press ENTER/YES to select the phrase.
4. To unselect the phrase, press ENTER/YES again.
To select a region:
1. Set the boundaries of the desired region by placing the IN point at its beginning
and the OUT point at its end.
2. Press or to cursor to the track on which the region resides.
3. Press ENTER/YES to select the region. To unselect it, press ENTER/YES again.
If EDIT POINT Sw TYPE is set to OVERWRITE, you can still move the timeline to an
edit point—hold down SHIFT and press the desired IN, OUT, FROM or TO button.
TRACK EDIT
COPY MOVE INSERT CUT ERASE COMP / EXP. IMPORT
TO TO OUT OUT IN IN FROM FROM
COPY MOVE TRIM IN TRIM OUT DELETE SPLIT NEW
REGION
PHRASE
AUTOMIX GRADATION
VS2480OMUS.book 247 ページ ２００６年２月７日 火曜日 午後４時１６分