Roland VS-2480 - Manual (Page 362)

28—UTILITY Menu Parameters
362 www.rolandus.com Roland VS-2480 Owner’s Manual
H.POSITION
Adjust the H.POSITION (“Horizontal Position”) parameter if you’d like to shift the
image on your VGA monitor to the left (negative values) or to the right (positive values).
You can move as far as -5 to the left or +5 to the right.
V.POSITION
Adjust the V.POSITION parameter if you’d like to shift the image on your VGA monitor
downward (negative values) or upward (positive values) by as much as -11 down or +11
up.
PS/2 MOUSE
For a description of the VS-2480’s mouse settings, see Page 64.
PS/2 KEYBOARD
For a description of the VS-2480’s ASCII keyboard settings, see Page 64.
GLOBAL
INPUT PEAK LEVEL
The INPUT PEAK LEVEL parameter sets the level at which the input peak indicators
on the Home screen and elsewhere light, as described on Page 125. You can set the
input peak indicators to light when a signal coming into an input channel reaches -6dB,
-3dB or 0dB—a light gray line across the input meters display (Page 124) shows the
current INPUT PEAK LEVEL value.
FOOT SWITCH ASSIGN
An optional foot switch—such as a Roland DP-2 or BOSS FS-5U—connected to the
VS-2480’s rear panel FOOT SWITCH jack can perform a variety of functions. This
parameter determines what a connected foot switch does. You can set the parameter to:
• Play/Stop —so you can start and stop project playback with the foot switch.
• Record —so you can toggle in and out of Record mode with each press of the foot
switch, allowing for hands-free punching.
UTILITY menu
F2 (GLOBAL)
VS2480OMUS.book 362 ページ ２００６年２月７日 火曜日 午後４時１６分