Roland VS-2480 - Manual (Page 269)

20—Region Editing Operations
Roland VS-2480 Owner’s Manual www.rolandus.com 269
IMPORT
Use: Mouse, TRACK EDIT buttons, TRACK menu
You can import a track from another project recorded using the same
sampling rate and recording mode as the current project.
When you select IMPORT, the VS-2480 scans the selected drive and presents you a list
of all projects that contain importable audio.
Select the desired project and press F5 (OK). On the screen that appears, you can select
the track you want to import, and the track in the current project on which you want to
place the imported audio.
To return to the main IMPORT screen, press F1 (<<BACK).
Why You’d Use Region IMPORT
IMPORT lets you share favorite recordings between projects, or create new projects
based on previously recorded source materials.
SOURCE
Turn the TIME/VALUE dial to select the track you want to import.
DESTINATION
Turn the TIME/VALUE dial to select the track in the current project on which you want
to place the imported audio.
You can import CDR-mode disk-image audio (Page 340) into any project, regardless of
its sampling rate or recording mode. If the project uses the CDR mode, you can import
the image to any V-Tracks. Otherwise, you can import it only to unused V-Tracks
belonging to Tracks 23 and 24. CDR-recorded audio is always stereo, so it’s imported to
two tracks—when you select a destination track, its odd/even partner is also selected.
TRACK menu
F2 (IMPORT)
The source
project and
source track
The destination
project and
destination track
VS2480OMUS.book 269 ページ ２００６年２月７日 火曜日 午後４時１６分