Roland VS-2480 - Manual (Page 69)

4—Setting Up and Basic Operations
Roland VS-2480 Owner’s Manual www.rolandus.com 69
Pop-Up Menus
When a pop-up menu is available, you can select an item in the
menu by dragging the mouse to it—so the item’s highlighted—
and then click the left mouse button to select it. The following two
pop-up menus are available from a number of screens.
Display Pop-Up Menu
You can quickly jump to some of the VS-2480’s most important screens by clicking on
the small rectangle in the upper left-hand corner of many of the VS-2480’s screens.
Channel Pop-Up Menu
If you’re using a mouse, you can also select a new input, track or FX return channel from
any screen on which the currently selected channel’s number is displayed as shown here.
To select a new channel:
1. Click the channel number. The Channel Pop-Up menu appears.
2. Move the cursor to the desired channel and click.
Using an ASCII Keyboard
After you’ve connect an ASCII keyboard to the PS/2 KEYBOARD jack, and activated it
(Page 64), you can use the keyboard to perform various actions.
What You Can Do With an ASCII Keyboard
You can use the keyboard’s: To:
Letter and number keys enter names for projects, tracks, scenes, locators, etc.
Space bar start, stop and continue project playback
Arrow keys move the cursor on the VS-2480’s display
SHIFT+arrow keys zoom in and out vertically and horizontally
Home display the Home screen
F7 display the EZ Routing VIEW screen
SHIFT+F7 display the EZ Routing P.BAY screen
SHIFT+F8 display Mastering Room screen
Ctrl+S store the current project
Ctrl+Alt+Delete shut down the VS-2480
Drag to the
desired
menu item
and click.
Input channel Track channel FX return channel
VS2480OMUS.book 69 ページ ２００６年２月７日 火曜日 午後４時１６分