Roland VS-2480 - Manual (Page 42)

2—Getting Around
42 www.rolandus.com Roland VS-2480 Owner’s Manual
5—TIME/VALUE Dial
The TIME/VALUE dial—located inside the SHUTTLE ring—performs two important
jobs:
• During project playback, you can turn the dial to move forward or backward in
time. See Page 126 for more information.
• Turn the TIME/VALUE dial to adjust settings.
6—SHUTTLE Ring
Turn the SHUTTLE ring—the wheel that surrounds the TIME/VALUE dial—to move
quickly back (counter-clockwise) or forward (clockwise) through a project. See “The
SHUTTLE Ring” on Page 178 for details.
7— (Cursor)/ZOOM Buttons
Press the , , or cursor buttons to move the selection cursor (Page 65) around
the VS-2480’s display.
Hold down SHIFT and press the desired arrow button to zoom in and out on track data
shown in the playlist area of the Home screen (Page 119) and other screens:
• Press to increase the horizontal magnification.
• Press to decrease the horizontal magnification.
• Press to increase the vertical magnification.
• Press to decrease the vertical magnification.
8—UNDO•REDO Button
The VS-2480 allows you to reverse—or “undo”—up to 999 of your last recording or
editing actions. Press the UNDO•REDO button to view the Undo dialog. After undoing
any action, you can also “redo” it by pressing UNDO•REDO while holding down
SHIFT—the Redo dialog appears.
SCRUB, PREVIEW and Transport Buttons
1—SCRUB Button
When you need to precisely locate a moment in a track, press SCRUB to activate the
Scrub feature. When SCRUB is lit, you can turn the TIME/VALUE dial to move the
timeline and listen to a tiny piece of the track play over and over—this lets you zero in
on just the moment you’re looking for. This can be very helpful when editing. To turn
off scrubbing, press SCRUB again so its light goes out. See Page 184 to learn more.
AUTOMIX REC RESTART STORE
ZERO STOP PLAY REC
PROJECT END PROJECT TOP
SCRUB EXT SYNC TO THRU FROM
PREVIEW
SHUT / EJECT
1
2 3 4
5
6 7 8 9
VS2480OMUS.book 42 ページ ２００６年２月７日 火曜日 午後４時１６分