How do automix tracks work, Which parameters can be automated, The automix screen – Roland VS-2480 User Manual

Page 326: Navigating to the automix screen, The writing parameter area

Advertising
background image

26—Automix

326

www.rolandus.com

Roland VS-2480 Owner’s Manual

How Do Automix Tracks Work?

For every input, track, Aux bus and FX return channel there’s a dedicated Automix
track. When Automix mode is active, a channel’s Automix track can capture or play
back changes you make to its parameters. There are also Automix tracks for the
MASTER bus, the Direct busses and for Effects 1-8.

Which Parameters Can be Automated?

Automix works with a wide array of input, track and FX return CH EDIT parameters, as
well as important MASTER EDIT, Aux bus and Direct bus parameters. For a list of the
parameter values you can automate, see “Automix Parameter List” on Page 410.

Automix also memorizes and plays back effect patch changes. When you select a new
patch as the project plays—see Page 221—the new selection is captured b
y Automix.

The AUTOMIX Screen

Navigating to the Automix Screen

1.

While holding down SHIFT, press AUTOMIX—the AUTOMIX
screen appears.

The WRITING PARAMETER Area

The WRITING PARAMETER area of the AUTOMIX screen shows various parameter
groups. When a parameter group is checkmarked, changes made to its parameters are
captured when you record Automix data, both in realtime (Page 329) and in A
utomix
snapshots (Page 330).
Check only the parameters you want to automate to streamline
your Automix data and minimize visual clutter in the AUTOMIX EDIT screen.

To toggle a WRITING PARAMETER group’s checkmark on or off, turn the TIME/
VALUE dial to select the desired group and press ENTER/YES.

LEVEL

PAN/Bal (“Pan/Balance”)

EQ

MUTE

AUXSend

InsFXLev (“Insert FX Level”)

SURROUND

You can also automate most VS-2480 actions with MIDI SysEx messages (Page 301).
Automix is easier to work with since it doesn’t require an in-depth knowledge of MIDI.

We’ll describe the AFTER PUNCH OUT and RETURN TIME parameters in our
discussion of punching Automix data on Page 329.
We’ll describe F1 (EDIT) in “Editing
Automix Data” on Page 331.

SHIFT

+

AUTOMIX

VS2480OMUS.book 326 ページ 2006年2月7日 火曜日 午後4時16分

Advertising