Omega RD260A - Manual (Page 48)

5 - 4
5.1.2 SET Mode
This flow can be entered by pressing the [DISP] key for three seconds.
: Numeric value input
: Code input
Channel No. Alarm level
Alarm on/off
Alarm point
Contact output
Channel
Relay No.
(Alarm setting)
First/second speed
Chart feed speed
(Chart feed speed setting)
year/month/day ('97 June 1) hour/minute (12:00)
(date and time setting)
Type of alarm
Range Span (L) Span (R)
(Voltage input
setting and
span setting)
Span (L) Type
Type
Span (R)
(TC input setting and span
setting)
Span (L) Span (R)
(RTD input setting and
span setting)
Reference channel Span (L) Span (R)
(Designation of
difference computation)
(Skip: when there is no measurement, recording, or display of an
unused channel)
Range Span (L) Span (R)
Scale (L) Scale (R)
(Scaling setting)
(Setting of offsets, when offset settings protection function is on)
Offset
Range Span (L) Span (R)
Scale (L) Scale (R)
(Square-root extraction setting)
(Measuring unit setting)
(Contact input setting)
Channel No.
*1
*1
*1: displayed only when the
range is set to differential
computation.
(Setting of dot-printing cycle in analog records) (Dot-printing model)
(Message setting)
(Key lock)