15 changing the temperature unit (/d2 option) – Omega RD260A User Manual
Page 87
7 - 16
7.15 Changing the Temperature Unit (/D2 option)
For the TC or RTD type, the recorder will automatically append the temperature unit
(°C or °F).
The initial value is expressed in ‘°C’, and common for all channels.
SETTING PROCEDURE:
Enter the SET UP mode by turning ‘ON’ the power while pressing and holding the [CH
UP] (
ENT) key until the SET UP display appears.
Use the [
] key to select the display [
]. Press the [ENT] key.
Select [
] (°C) or [
] (°F) using the [
] key.
Press the [ENT] key. The display [
] appears.
Before leaving the SET UP mode, you have to store your new settings. Use the [
] key
to select the [
] display, and press the [ENT] key.
Select [
] to keep your new settings or [
] to abort the settings, and
press the [ENT] key. After a few seconds, the OPERATION mode will appear.
NOTE
When you change this setting, all settings in the SET mode will return to their
initial values.