Oceanic Watch / Dive Computer GEO User Manual
Page 109
109
Press/release the S button momentarily (< 2 seconds) to
toggle between ON and OFF.
> If a Time has been set, a toggle from OFF to ON will Start
the CD Timer indicated by the colon flashing.
> An ON/OFF toggle is prevented when S is operated to
acknowledge/silence the Watch Daily Alarm.
Pressing the A button momentarily (< 2 sec), or depressing
the M button for 2 seconds, or if no button is pressed
during a period of 2 minutes, the Display will revert to the
FREE SURF MAIN screen.
Depressing both the A and S buttons simultaneously for 2
seconds while viewing the CDT Status screen when the CD
Timer is OFF will access the SET CDT screen with the
MINUTE Set Point flashing.
NOTES: Once the CD TIMER has been Set and
Started (by selecting ON), it will continue to
run in the background while on the surface
until turned OFF (stopped) or the Time reaches
0:00 at which time the Alarm will strike (3
short beeps 3 times), the message TIMR will be
displayed, and the CDT will revert to OFF.
Upon descending to 5 FT/1.5 M (i.e., entry into
FREE DIVE Mode), CDT operation will continue,
if in progress.
The Set Point for
the Watch CDT
does not affect
the FREE CDT.