Oceanic Watch / Dive Computer GEO - Manual (Page 76)

76
ELAPSED DIVE TIME
The maximum duration that Elapsed Dive Time will be displayed is 9 hours and
59 minutes (9:59). In the event that the GEO is at depth for a greater time, it will
cease operation as a Dive Computer and revert to operation as a Watch, display-
ing the Main Time screen.
CONTROL OF DISPLAYS
During Dive Modes, there is a Main (Default) Display of important information
relevant to the specific mode that the GEO is operating in (No Deco, Deco,
GAUG, FREE, etc.).
Alternate and Secondary Displays can be accessed by pressing and releasing the
A button (Lower/Left) to view additional information. They will automatically
revert to the Main Display after 5 seconds unless the A button is pressed again.
 Dive Main > Alternate > Secondary
The S button (Upper/Right) is used to acknowledge and silence Alarms.
The L button (Lower/Right) is used to activate the Backlight.
 The display will be illuminated as long as the L button
is depressed, plus the Backlight Duration time set (0,
5, or 10 seconds) for a maximum of 20 seconds
 The Backlight will not activate during a Low Battery
condition.
A
S
L
M