Oceanic Watch / Dive Computer GEO - Manual (Page 18)

18
LOCAL DEFAULT TIME
Watch Main Time (Fig. 5) is the current Time at your home
location and is normally selected as the Local Default Time.
The normal Watch screen sequence accessed with momentary
presses (less than 2 seconds each) of the M button is -
Main Time > Alternate Time > Countdown Timer >
Chronograph > Daily Alarm
Watch Alternate Time (Fig. 6), which is set by Hour
Differential, is the current Time at a remote travel location.
Upon arrival at the location, Alternate Time can be inter-
changed with Main Time to make it the Local Default Time
while visiting the travel location.
The M button will then access the screens in this sequence -
Alternate Time > Main Time > Countdown Timer >
Chronograph > Daily Alarm
While viewing Alternate Time, depressing and holding the S
button for 2 seconds will replace Main Time with Alternate
Time that will then become the Local Default Time until
changed.
Fig. 5 - MAIN TIME
Fig. 6 - ALTERNATE
TIME
TIME for the Remote
Location will display
Am (or Pm). Local
Default TIME will
not.