Oceanic Watch / Dive Computer GEO - Manual (Page 50)

50
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds) will step through the other SET A
screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert back to the SET A
screen.
 Depressing and holding the M button for 2 seconds or if
no button is pressed for a period of 2 minutes operation
will revert to the NORM or GAUG SURF MAIN screen.
SET NORM TLBG (TISSUE LOADING BAR GRAPH)
ALARM, information includes (Fig. 44):
> Graphic TLBG
> TLBG Set Point (Bar Graph segments) flashing.
 Pressing and releasing the S button momentarily (< 2
seconds) will decrease the Set Point from all 5 segments
(Deco) to 1 in decrements of 1 segment.
 Depressing and holding the S button will scroll through the
Set Points at a rate of 4 Set Points per second until it is
released.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
DTR ALARM screen with the Set Point flashing.
 Pressing and releasing the A button momentarily and
repeatedly (< 2 seconds each time) will step through the
other SET A screens.
Fig. 44 - SET TLBG
ALARM
FREE Mode has a
separate TLBG
Alarm.