Oceanic Watch / Dive Computer GEO - Manual (Page 97)

97
To view that dive's Log during the Transition Period -
 Press/release the A button (< 2 seconds) to access the
Preview screen (Fig. 91).
 Press/release the S button (< 2 seconds) to view the Log
Data 1 screen.
 Press/release the S button (< 2 seconds) again to view the
Log Data 2 screen.
 Press/release the S button (< 2 seconds) again to view the
Log Data 3 screen.
 Press/release the S button (< 2 seconds) again to return to
the NORM Surface Main screen.
 The screen will revert to the NORM Surface Main after 2
minutes if the S button is not pressed.
Log Data will not be stored in the unit's memory until the 10
minute Transition Period on the surface is completed.
Once 10 minutes have elapsed, the SURF icon will stop
flashing indicating that the Dive and Transition Period are
completed, and a subsequent descent will be considered a
new dive. Operation will then revert to the Watch TIME
Display.
AFTER THE TRANSITION PERIOD
Once the Transition Period has ended, the NORM Surface
Main screen (Fig. 92) can be accessed from the Watch TIME
screen by pressing the M button for 2 seconds. You will then
have full access to other NORM DC modes/displays).
Fig. 91 - LOG
PREVIEW
(during Transition
Period)
Fig. 92 - NORM SURF
MAIN
(after Transition Period)