Oceanic Watch / Dive Computer GEO - Manual (Page 127)

127
NOTE: The Hatch O-ring must be a genuine
Oceanic part that can be purchased from an
Authorized Oceanic Dealer. Use of any other
O-ring will void the warranty.
 Carefully place the Battery Hatch (with O-ring) into
position on the rim of the Battery Compartment, then press
it evenly and completely down into place.
 Maintain the Battery Hatch securely in place and turn it
counter clockwise 10 degrees using the special Battery
Hatch tool provided (Fig. 122), or by pushing the lower
portion to the right while pushing the upper portion to the
left (Fig. 123).
Testing
 Observe the LCD display to ensure it is consistently clear
and sharp in contrast throughout the screen.
 Set the Date, Main Time, Alternate Time, and Daily Alarm.
 Verify all Set Points prior to diving.
 If any portions of the display are missing or appear dim,
or if a Low Battery Condition is indicated, return your
GEO to an Authorized Oceanic Dealer for a complete
evaluation before attempting to use it.
Fig. 122 - HATCH
INSTALLATION
(using tool)
Fig. 123 - BATTERY
HATCH O-RING
(without tool)