Oceanic Watch / Dive Computer GEO - Manual (Page 63)

63
 Pressing and releasing the A button momentarily (< 2 seconds) will advance
to SAT MODE.
 Depressing and holding the M button for 2 seconds will revert to the NORM
(or GAUG) SURF MAIN screen.
 If no button is pressed during a 2 minute period, operation will revert to the
NORM (or GAUG) SURF MAIN screen.
 Pressing the L button will activate the Backlight.
DESAT MODE
The Time to Desaturate counter provides calculated time for Tissue Desaturation at
sea level taking into consideration the Conservation Factor setting. It begins
counting down 10 minutes after surfacing from a NORM (or FREE) dive, counting
down from 23:50 max to 0:00 (hr:min).
When the Countdown reaches 0:00, which will generally occur prior to the FLY
countdown reaching 0:00, the SAT screen remains in the sequence of accessible
screens displaying 0:00 until the FLY counter shuts the Dive Computer operations
Off 24 hours after a last dive.
> The SAT screen is not displayed after a Violation Dive.
> DESAT Times greater than 24 hours will be displayed as 23: - -
> In the event that DESAT Time still remains at the end of the 24 hours
countdown, the added time will be zeroed.
> Ten minutes after surfacing from a dive, operation reverts to the Watch Mode
Time screen at which time the DESAT Countdown continues in the
background. Access to the SAT screen can then be gained by first accessing
the NORM SURF MAIN screen.