Oceanic Watch / Dive Computer GEO - Manual (Page 39)

39
 The Operating Mode selected (NORM, GAUG, or FREE)
will remain on display for 2 hours until a dive is made or
Watch Mode is selected.
If a dive has been conducted within the past 24 hours, the
SURF MAIN screen for that Operating Mode (NORM, GAUG,
or FREE) will be displayed.
At any time while operating in Surface Modes, the GEO will
enter Dive Mode upon descent to 5 FT (1.5 M) for 5 seconds.
 During the 2 hour pre dive surface period, if the M button
is pressed to access other screens in the Watch Mode
sequence, Surface Mode must again be accessed prior to
the first dive of a series (if Wet Activation is set OFF).
 When Wet Activation is set ON, the Wet Contacts will
activate the selected Dive Mode regardless of what Mode
the GEO is operating in at the time of the descent.
The GEO will enter POST DIVE SURFACE MODE following a
dive upon ascent to 2 FT (0.6 M) for 1 second. The SURF icon
will flash during the first 10 minutes after a NORM/GAUG
dive (Fig. 32), or 1 minute after a FREE dive.
During the first 10 minutes after a dive, the SURF MAIN screen
for the Operating Mode selected prior to the dive (NORM,
GAUG, or FREE) remains on display as the Default SURF MAIN
screen.
Fig. 32 - NORM
SURFACE MODE
(Post Dive Wet)