Oceanic Watch / Dive Computer GEO User Manual
Page 125
125
Lift the Hatch with O-ring up and away from the Housing.
Using care not to damage the Contact (Fig. 119a), slide
the Battery up and out of the Left side of the Battery
Compartment.
Discard the Battery according to local regulations
governing disposal of Lithium batteries.
CAUTION: DO NOT allow a metal object to
short circuit the top of the Battery which is
positive (+) to the negative ( - ) contact of the
Battery Compartment.
Inspection
Closely check all of the sealing surfaces for any signs of
damage that might impair proper sealing.
Inspect the Buttons, Lens, and Housing to ensure they are
not cracked or damaged.
WARNING: If damage or corrosion is found,
return your GEO to an Authorized Oceanic
Dealer, and DO NOT attempt to use it until it
has received factory prescribed service.
Remove the Battery Hatch O-ring and inspect it for any
signs of deterioration or deformity. DO NOT use tools to
remove the O-ring.
To ensure proper sealing, O-ring replacement is highly
recommended each time the Battery is replaced.
a
Fig. 119 - BATTERY
REMOVAL