Oceanic Watch / Dive Computer GEO - Manual (Page 22)

22
Displayed on the SET DATE screen will be the graphic YEAR,
Month and Day (or Day and Month if set for metric) with the
YEAR Set Point flashing (Fig. 11).
 Depressing and holding the S button while the YEAR Set
Point is flashing will scroll through the Set Points in 1 year
increments at a rate of 4 per second from 2006 to 2049
(with leap year corrections).
 Pressing and releasing the A button momentarily (< 2 sec)
will save the Year Set Point and/or advance to SET
MONTH with the Set Point flashing and the graphic
MNTH (Fig. 12).
NOTE: The YEAR will not be displayed in any
Mode other than SET DATE. The DATE will reset
to 1.1 2006 when the Battery is replaced.
 Depressing and holding the S button while the MONTH Set
Point is flashing will scroll through the Set Points in 1 month
increments at a rate of 4 per second from 1 to 12.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the Month Set Point and/or advance to
SET DAY with the Set Point flashing and the graphic DAY
(Fig. 13).
 Depressing and holding the S button while the DAY Set
Point is flashing will scroll through the Set Points in one
day (01) increments at a rate of 4 per second from 1 to 31
(or the highest Day for the Month set).
Fig. 11 - SET YEAR
Fig. 12 - SET MONTH
Fig. 13 - SET DAY