Oceanic Watch / Dive Computer GEO - Manual (Page 23)

23
 Pressing and releasing the A button momentarily (< 2
seconds) will save the Set Point and/or advance to the
MAIN TIME screen.
NOTE: DAY of the WEEK is set automatically
based upon the Date that has been set.
ALTERNATE TIME
 Pressing and releasing the M button momentarily (< 2
seconds) while the MAIN TIME screen is displayed will
access the ALTERNATE TIME screen.
Information provided includes (Fig. 14):
> Tissue Loading Bar Graph, if any after NORM/FREE dives.
> Alarm icon (solid) - if the Daily Alarm is set On.
> Lazy 8 symbol (Fig. 14a) identifies Time as Alternate Time.
> Day of the Week graphic MON (or TUE, WED, THU, FRI,
SAT, SUN), or WET (if the unit is wet).
> Battery icon, if a Low Battery Condition exists.
> Month and Day (Day and Month if set for Metric).
> Time of Day (hr:min:sec).
 Pressing and releasing the M button momentarily and
repeatedly (< 2 seconds) will step through the other Main
Watch Modes.
 Pressing and releasing the S button (< 2 seconds) will
silence and acknowledge the Daily Alarm (if its set On
and it sounds).
Fig. 14 - ALTERNATE
TIME
a
Main Time/Date can
also be set using the PC
Settings Upload
program which is on the
OceanLog software CD.
Prior to shipment from
the factory, any error of
the Main Time is
determined and
corrected.