Oki 6E - Manual (Page 111)

6 - 11
Category
Controller errors
ERROR 0n
aaaaaaaa
An error occurred in the controller.
n = Exception Code
aaaaaaa = Error Address – Normal operation cannot be
ensured. Turn the power off,
then back on to restart.
– If normal operation is not
recovered by this restart
procedure, replace the Main
Control PCB.
LCD status message Trouble or status Remedy
An error occurred in the controller. – Turn the power off, then back
on to recover from the error.
– If the normal operation is not
recovered by this restart
procedure, use the following
remedial actions.
ERROR nn
Table 6-2