Oki 6E - Manual (Page 93)

4 - 14
Parts
LED head
Image drum unit Drum counter reset (Refer to the User's Manual.)
LED head drive time
Head Type
Required Adjustment
Main Control Board EEPROM data Upload/Download (See 4.3.1 4.)
Last 3 digits represent the
LED head marking number.
Luminous intensity marking
027
|
154
1224G2
or
or
401326
403579
. . . . .
73000123400101100
. . . . .
74000123400101100
7 3
4.3.2 Adjustment When Replacing a Part (OKIPAGE6ex: 600dpi LED head)
Adjustment is necessary when replacing any one of the following parts.
1 Setting of LED Head Drive Time
Note: When the luminous intensity marking of the replacement LED head (new part) is
same as that of the removed LED head (old part), do not set the LED head drive
time.
• Luminous Intensity Marking Label