Oki 6E - Manual (Page 196)

D - 1
Appendix D MAINTENANCE UTILITY OVERVIEW
1. OVERVIEW
A Maintenance Utility for the OKI LED printers (hereinafter referred to as the Maintenance Utility)
is an application program that runs on the Microsoft Windows 3.1 and Windows 95.
It is a software designed to set various settings such as printer engine menu, counter initialization,
etc. by sending environment setting command selected by the operator.
Environment setting languages transmitted is OPEL (Oki Print Environment Language) and PJL.
The printer supported by this utility is as shown below.
• OKIPAGE4W • OL610e/610ex • OKIPAGE6e
• OL600e/600ex • OL400W • OKIPAGE6ex
1.1 Purpose of the Maintenance Utility
The Maintenance Utility is an application program which is essentially a collection of command
transmission/reception functions for factory setting at the time of shipment from the factory and
for maintenance works performed by maintenance engineer at customers premises.
The Maintenance Utility is designed to be used only by service personnel and it should not be
released to the end-users.
1.2 Maintenance Utility Functions
Functions supported by the Maintenance Utility are as follows.
(1) Engine Menu
For setting/initializing the engine menu.
(2) Engine Counter Reset
For resetting the engine counter.
(3) Test Print
For printing test data.
(4) Engine Reset
For resetting the engine menu/counter.
(5) RAM Check
For checking RAMs on the printer (Not yet supported).
(6) EEPROM Upload/Download
For uploading/downloading the contents of the EEPROM.