Oki 6E User Manual
Page 131
Advertising
6 - 31
2
-2-a
2
-2-b
▼
• Yes
Replace the Main Control PCB.
▼
• Yes
Is the transfer roller rotating?
• No
Check the gears (TR gear, idle gear and reduction gear).
▼
• Yes
Is the fuser unit being installed properly?
• No
Install the fuser unit properly.
▼
•Yes
Is the image drum unit being set properly?
• No
Set the image drum unit properly.
▼
• Yes
Clean the write sensor on the power supply board or replace the power supply
board.
Advertising
This manual is related to the following products: