Oki 6E - Manual (Page 41)

2 - 26
(7) Cleaning
When the transfer is completed, the residual toner left on the image drum is attracted to the
cleaning roller temporarily by static electricity, and the image drum surface is cleaned.
(8) Cleaning of rollers
The charge, transfer and cleaning rollers are cleaned for the following cases:
• Warming up when the power is turned on.
• Warming up after the opening and closing of the cover.
• When the number of sheets accumulated reaches 10 or more, and the printout operation
ends.
• User initiated.
Changes in bias voltage applied to each roller moves the attaching toner off the roller to the
image drum and returns it to the developer.
Cleaning roller
Image drum
Transfer roller
Power
supply