Oki 6E - Manual (Page 245)

F - 10
3.3.1 Pulse Motor (Hopping)
(1) Turn the printer power switch off “O” and remove the interface cable.
(2) Remove the paper casette
1 .
(3) Open the Front cover 2 , stand the High Capacity Second Paper Feeder vertically and
remove the 2 E-clamps 3 .
(4) Remove the 2 levers 4 , and remove the tension springs 5 .
(5) Pull out the sheet guide 6 to the front.
(6) Remove the 6 screws 7 , and remove the front support plate 8 .
(7) Remove the connector 9 and the 2 screws 0 , and remove the pulse motor A .
7
8
7
9
0
A
6
2
1
3
5
4