Oki 6E - Manual (Page 71)

3 - 23
3.3.17 Sensor Plate (Outlet)
(1) Remove the upper cover (see 3.3.1).
(2) Remove the eject roller assy (see 3.3.4).
(3) Remove the lower base unit (see 3.3.7).
(4) Remove the fusing unit assy (see 3.3.13).
(5) Press the clamp of the sensor plates (outlet) 1 , and remove the sensor plate by pushing it
up from the bottom.
1
1
Clamp Clamp