Oki 6E User Manual
Page 223
Advertising
![background image](/manuals/204298/223/background.png)
E - 12
3.3.3
OLEV-11 PCB
(1) Remove the upper frame (see 3.3.2 steps (1) through (3)).
(2) Remove the connector
1
.
(3) Remove the 2 screws
2
, and remove the OLEV-11 PCB
3
.
When mounting the printed circuit board, be careful to make sure that the sensor plate is being
set correctly.
1
2
3
3
Sensor Plate
Advertising
This manual is related to the following products: