N o t e – Olivetti 145D User Manual

Page 44

Advertising
background image

4 2

6.

To listen to message 1 recorded previously, press the
key:

The display shows:

PLAYING

When it gets to the end of the message, the fax machine
automatically prepares to record a new OUTGOING
MESSAGE 1. In this case, if you like, you can change
or replace the message recorded previously by re-
peating the recording procedure.

7.

To return the fax machine to the initial stand-by mode,
press the key:

8.

If you want to move back one function, press the key:

T

O

RECORD

OUTGOING

MESSAGE

2

Record outgoing message 2 as you recorded OUTGOING
MESSAGE 1, modifying the

step 4

as follows:

Press the

keys until the display shows:

TAD SET-UP
OGM 2

n o t E

Bear in mind however that you only have 10 seconds.

T

O

LISTEN

TO

OUTGOING

MESSAGE

2

Play back outgoing message 2 as you played back OUTGO-
ING MESSAGE 1 modifying the

step 4

as follows:

Press the keys until the display shows:

TAD SET-UP
OGM 2

T

O

ERASE

OUTGOING

MESSAGE

2

This procedure can only be carried out from the fax
machine.

1.

Press the key:

The display shows:

MENU
RECEPT. SET-UP

2.

Press the keys

until the display shows:

MENU
TAD SET-UP

7.

Press the key:

The display shows:

RECORD OGM #1
LIFT HANDSET

8.

Lift the handset.

The display shows:

RECORD OGM #1
<|> TO RECORD

9.

To start recording the message, press the key:

You have 20 seconds (counted on the display) to record

your message:

if the message lasts

less than 20 seconds

, when you

reach the end of the message hang up or press the

key.

the fax machine automatically plays back the message
you have recorded.

n o t E

If the

volume

of the message is

too low

or

too high

you can

regulate it, during playback, using the

key. The display

shows the volume level set on the bottom line.

T

O

LISTEN

TO

OUTGOING

MESSAGE

1

1.

Press the key:

The display shows:

MENU
RECEPT. SET-UP

2.

Press the keys

until the display shows:

MENU
TAD SET-UP

3.

Press the key:

The display shows:

TAD SET-UP
ICM ON SPEAKER

4.

Press the keys

until the display shows:

TAD SET-UP
OGM 1

5.

Press the key:

The display shows:

OGM 1
PLAY

Advertising