Olivetti 145D - Manual (Page 66)

6 4
5. To select the number that corresponds to the desired
base unit or the "AUTO" option, press the upper or
lower part of the key:
If you select "AUTO", the cordless phone will
automatically use any available base unit on which it
has been registered. If a specific base unit is selected,
the cordless phone will receive and make calls
exclusively from that base unit.
6. Keep pressed the key:
The cordless phone returns automatically to stand-by
mode.
T
O DELETE A CORDLESS PHONE
If desired, you can delete a cordless phone from the
base unit. Remember however that you cannot delete
the cordless phone that you are using.
1. On the cordless phone, press the upper or lower part
of the key
until the display shows:
REGISTRATION
2. Press function key F3:
The display shows:
REGISTER BASE
3. Press the upper or lower part of the key
until the display shows:
DE-REGISTER HANDSET
4. Press function key F3:
The display shows:
PIN CODE ?
5. Type the PIN on the keypad of the cordless phone.
Then press function key F3:
The display shows:
1 2 3 4 5
6. Select the number of the cordless phone you wish to
delete. To do this, press the upper or lower part of the
key:
7. To confirm your choice, press function key F3:
The cordless phone selected is deleted while the
cordless phone you are using returns automatically to
stand-by mode.
T
O TRANSFER A CALL AND
/
OR START A THREE
-
PARTY
CONFERENCE CALL
If desired, while making external telephone call on the
cordless phone, you can transfer the call to another
compatible cordless phone or to the fax machine.
1. During the call, keep pressed for more than 1.5
seconds the key:
The display shows:
TRANSFER TO HANDSET
The external party is put on hold.
2. On the keypad of the cordless phone, type the number
of the compatible cordless phone to which you want to
transfer the call (to transfer the call to the fax machine,
type 0). Then press function key F3:
3. If you have transferred the call to a compatible cordless
phone, when the internal party answers the call, you
can talk to him. If you have transferred the call to the
fax machine you cannot call the internal party.
4. To start a three-party conference call (only possible
between 2 compatible cordless phones and the
external party), skip to step 5. If you simply want to
transfer the call, press the key:
The cordless phone returns automatically to stand-by
mode.
5. To start the three-party conference call, press function
key F1:
6. At the end of the conversation, press the key:
The cordless phone returns automatically to stand-by
mode.
N O T A
If the internal party does not answer the transferred call, press
the
key again for more than 1.5 seconds to reconnect to
the external party.
T
O START AN INTERNAL CONVERSATION BETWEEN
CORDLESS PHONES
This type of conversation is only possible between 2
compatible cordless phones registered on the base
unit. These calls, which are free of charge, enable
cordless phones to communicate with one another
when they are covered by the same base unit.
1. While the cordless phone is in stand-by mode, press
the key:
The display shows:
INTERNAL CALL TO HANDSET
2. On the keypad of the cordless phone, type the number
of the compatible cordless phone you want to call.
Then, press function key F3:
3. When the internal party answers the call, you can talk
to him.
4. At the end of the conversation, press the key:
The cordless phone automatically returns to stand-by
mode.