Aintenance, Operations, N o t e – Olivetti 145D User Manual

Page 73

Advertising
background image

7 1

M

AINTENANCE

OPERATIONS

T

O

REPLACE

THE

PRINT

CARTRIDGE

The print cartridge

must be replaced

, when

the ink runs

out

(

used print cartridges cannot be used

) or when you

notice a

deterioration in the print quality

.

In the former case, the fax machine automatically prints a
sheet to remind you that the ink is about to run out and that
you should replace it.

10. Close the operator console and put the handset back on its

support.

n o t e

If you have replaced the cartridge because

the ink ran out

,

when the operator console is closed, the fax machine will
automatically recognize that the cartridge has been replaced
a n d t h e

d i s p l a y w i l l s h o w

t h e m e s s a g e "N E W P R I N T

CART.? 1=YES 0=NO". Set the value

1

.

At this point, the fax machine

automatically resets the car-

tridge and tests the nozzles

, and prints out a numbered

scale and a message indicating that the cartridge has been
replaced correctly on a sheet that it has loaded automatically.
If the print quality of the numbered scale is not satisfactory,
see "

Insert the print cartridge

" in the "

How to get started

quickly

" chapter.

If you replaced the cartridge because of a

deterioration in

print quality

, proceed as follows:

1.

On the fax machine, press the key

until the display shows:

MENU
RECEPT. SET-UP

2.

Press the keys

until the display shows:

MENU
CART. MAINTEN.

1

1. Lower the handset and place it

on a stable surface.

2. Open and lift the operator con-

sole as indicated by the arrows.

3. Release the print cartridge by

pressing the lever as indicated
by the arrow.

4. Remove the used print cartridge

from its compartment.

5. Take the new print cartridge out

of its package and, holding it on
both sides, peel off the film cov-
ering the nozzles.

Warning!

6. Avoid touching the electrical

contacts.

Warning!

7. Avoid touching the nozzles.

8. Insert the new print cartridge in

its compartment with the electri-
cal contacts facing towards the
print cartridge compartment.

9. Push the print cartridge until it

clicks into place.

Advertising