Olivetti 145D - Manual (Page 49)

4 7
6. To view the other available option, "ANNOUNCE ONLY
- YES", press the keys:
7. To confirm the setting, press the key:
If you have already recorded OGM 1, the display will
show the message "PLAYING" and the TAD will play it
back.
If you have not recorded it, the display will show the
message "OGM NOT RECORDED".
Then the display shows:
OGM 1
RECORD
8. To confirm the setting, press the key:
The display shows:
RECORD OGM 1
LIFT HANDSET
9. To change the outgoing message recorded previously
or to record a new one, lift the handset.
The display shows:
RECORD OGM 1
<|> TO RECORD
10. To start recording, press the key:
The display shows:
RECORDING 20
S
ILENT RECEPTION OF INCOMING MESSAGES
Using this function you can receive messages confi-
dentially. In other words, the TAD receives messages
without playing them over the speaker so that any other
persons present cannot hear your messages.
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
TAD SET-UP
3. Press the key:
The display shows:
TAD SET-UP
ICM ON SPEAKER
4. Press the key:
The display shows:
ICM ON SPEAKER
NO
5. To view the other available option, "ICM ON SPEAKER
- YES", press the keys:
6. To confirm the setting, press the key:
7. To return the fax machine to the initial stand-by mode,
press the key:
8. If you want to move back one function, press the key:
T
O PRINT THE TAD CONFIGURATION
PARAMETERS
This procedure can only be carried out from the fax
machine.
1. Press the key:
The display shows:
MENU
RECEPT. SET-UP
2. Press the keys
until the display shows:
MENU
TAD SET-UP
3. Press the key:
The display shows:
TAD SET-UP
ICM ON SPEAKER
4. Press the keys
until the display shows:
TAD SET-UP
PRINT SET-UP
5. To start printing, press the key:
Once this operation has been completed, the fax ma-
chine automatically returns to its initial stand-by status.