Trimble Outdoors R7 - Manual (Page 126)

1 3 Setting up the Receiver
1 1 4 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R8 Operation
13.1
Introduction
This chapter provides general information on setup, connection, and
cabling for the Trimble R8 receiver.
13.2
Parts of the Receiver
All operating controls on the Trimble R8 receiver are located on the
front panel. Serial ports and connectors are located on the bottom of
the unit.
132.1
Front panel
Figure 13.1 shows a front view of the Trimble R8 receiver. The front
panel contains the three indicator LEDs, and the power button.
Figure 13.1 Trimble R8 receiver front panel
The power button controls the receiver’s power on or off functions.
The indicator LEDs show the status of power, satellite tracking, and
radio reception. For more information, see LED Behavior, page 125.