Logging/memory led, Sv tracking led, Logging/memory led sv tracking led – Trimble Outdoors R7 User Manual

Page 52: Tr imble r7 operation

Advertising
background image

4 General Operation

4 0 Trimble R7/R8 GPS Receiver User Guide

Tr

imble R7 Operation

43.1

Logging/Memory LED

The yellow Logging/Memory LED below the

d button indicates the

status of data logging and memory usage.

43.2

SV Tracking LED

The red SV Tracking LED below the SV icon

indicates the status

of satellite tracking.

Fast flash

alternates rapidly between being lit and unlit

On

is lit

Off

is unlit

Behavior

Meaning

On

Data is being logged.

Slow flash

Enough FastStatic data has been logged. Alternatively, if
the red SV Tracking LED is on solid at the same time, the
receiver is in Monitor mode, and is checking for new
firmware to install.

Fast flash

Data is being logged but memory is low.

Flash

The receiver is in Sleep mode, and will wake up five
minutes before the scheduled start time of a timed
application file.

Off

Data is not being logged, or the CompactFlash card is
full.

Behavior

Meaning

Slow flash

Tracking four or more satellites.

Fast flash

Tracking three or fewer satellites.

Off

Not tracking any satellites.

On

The receiver is in Monitor mode, and is checking for new
firmware to install.

The term …

means that the LED …

Advertising
This manual is related to the following products:

R8