Trimble Outdoors R7 - Manual (Page 208)

C Troubleshooting
1 9 6 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R7 and R8
Receiver does not log
data. Insufficient memory on the
CompactFlash card. Delete old files using the GPS
Configurator or Trimble Survey
Controller software, or by holding
down
p for 30 seconds.
No CompactFlash card is
inserted. Insert a CompactFlash card in the
receiver.
The CompactFlash card is not
seated properly. Remove the Compact Flash card and
reinsert it, making sure that it slides
into the housing easily and seats into
the pins.
The receiver is tracking fewer
than four satellites. Wait until the SV Tracking LED is
flashing slowly.
The CompactFlash card is not
formatted, or is corrupted. Format the CompactFlash card using
GPS Configurator, or by holding down
p for 30 seconds.
If the problem persists, use GPS
Configurator to perform a full format.
The receiver is not
responding. Receiver needs soft reset. Power down the receiver and power
back up.
Receiver needs full reset. Hold down p for 30 seconds.
If you want to retain data files, remove
the CompactFlash card first.
Table C.2 Receiver issues (continued)
Issue Possible cause Solution