Trimble Outdoors R7 - Manual (Page 99)

Trimble R7/R8 GPS Receiver User Guide 8 7
Default Settings 9
Tr
imble R7 Operation
9.4
Examples
The following examples show how the Trimble R7 uses the default
settings and special application files in various situations.
94.1
Default behavior
The factory defaults specified above are applied whenever you start
the receiver. If a Power Up file is present in the receiver, its settings
are applied immediately after the default settings, so you can use a
Power Up file to define your own set of defaults.
When you turn the receiver on and … then logging settings are … and logging …
it is the first time that the receiver has
been used the factory defaults does not begin
automatically
you have reset the receiver to its factory
defaults the factory defaults, or those
in the Power Up file
a
a
A factory default setting is only used if the setting is not defined in the Power Up file.
does not begin
automatically
you have performed a full reset the factory defaults, because
resetting deletes any Power
Up file does not begin
automatically