Led flash patterns, Starting and stopping the receiver, Tr imble r8 operation – Trimble Outdoors R7 User Manual
Page 138
1 4 General Operation
1 2 6 Trimble R7/R8 GPS Receiver User Guide
Tr
imble R8 Operation
143.1
LED flash patterns
The following table details the possible flash patterns to indicate
various states of receiver operation.
Note – If a column shows “N/A”, that specific LED may or may not be
on, but it is not relevant to that particular mode.
14.4
Starting and Stopping the Receiver
To turn on the receiver, press
p.
To turn off the receiver, hold down
p for two seconds.
Receiver mode
Power LED
Green
Radio LED
Green
Satellite LED
Amber
Receiver OFF
OFF
OFF
OFF
Receiver ON:
Healthy power
ON
N/A
N/A
Low power
Fast flash
N/A
N/A
Tracking <4 SVs
ON
N/A
Fast flash
Tracking >4 SVs
ON
N/A
Slow flash
Logging data
internally
Flashes off
every 3
seconds
N/A
N/A
Transmitting internally
N/A
Flashes off when
transmitting
N/A
Receiving valid data
packets
ON
Slow flash
N/A
No data packets
ON
OFF
N/A
Receiver in Monitor
ON
Slow flash
ON