Setup guidelines, Environmental conditions, Sources of electrical interference – Trimble Outdoors R7 User Manual

Page 129: Tr imble r8 operation

Advertising
background image

Trimble R7/R8 GPS Receiver User Guide 1 1 7

Setting up the Receiver 1 3

Tr

imble R8 Operation

13.3

Setup Guidelines

Consider the following guidelines when setting up the Trimble R8
receiver.

C

Caution – You must maintain a minimum separation distance of 20 cm
(approximately 8 in.) between yourself and the radiating GSM antenna for
this device to satisfy the RF Exposure requirements of the FCC.
For mobile operation, the maximum gain of the GSM antenna must not
exceed 0 dBi.

133.1

Environmental conditions

Although the Trimble R8 receiver has a waterproof housing,
reasonable care should be taken to protect the unit. Avoid exposure to
extreme environmental conditions, including:

Water

Heat greater than 65 °C (149 °F)

Cold less than –40 °C (–40 °F)

Corrosive fluids and gases

133.2

Sources of electrical interference

Avoid the following sources of electrical and magnetic noise:

Gasoline engines (spark plugs)

Televisions and PC monitors

Alternators and generators

Electric motors

Equipment with DC-to-AC converters

Fluorescent lights

Switching power supplies

Advertising
This manual is related to the following products:

R8