Battery charging and storage – Trimble Outdoors R7 User Manual

Page 142

Advertising
background image

1 4 General Operation

1 3 0 Trimble R7/R8 GPS Receiver User Guide

Tr

imble R8 Operation

The receiver is supplied with two rechargeable Lithium-ion batteries,
and a dual battery charger. The two batteries charge sequentially and
take approximately four hours each to fully charge.

147.1

Battery charging and storage

All battery types discharge over time when they are not being used.
Batteries also discharge faster in colder temperatures. If a Lithium-ion
battery is to be stored for long periods of time, make sure it is fully
charged before storing and re-charged at least every three months.

C

WARNING – Charge and use the rechargeable Lithium-ion battery only in
strict accordance with the instructions. Charging or using the battery in
unauthorized equipment can cause an explosion or fire, and can result in
personal injury and/or equipment damage.
To prevent injury or damage:
– Do not charge or use the battery if it appears to be damaged or leaking.
– Charge the Lithium-ion battery only in a Trimble product that is specified
to charge it. Be sure to follow all instructions that are provided with the
battery charger.
– Discontinue charging a battery that gives off extreme heat or a burning
odor.
– Use the battery only in Trimble equipment that is specified to use it.
– Use the battery only for its intended use and according to the
instructions in the product documentation.

Charging the Lithium-ion battery

The rechargeable Lithium-ion battery is supplied partially charged.
Charge the battery completely before using it for the first time. If the
battery has been stored for longer than six months, charge it before
use.

Advertising
This manual is related to the following products:

R8