Trimble Outdoors R7 - Manual (Page 155)

Trimble R7/R8 GPS Receiver User Guide 1 4 3
Software Utilities 1 6
Tr
imble R8 Operation
The Operation Selection screen appears. The Operations list
shows all of the supported operations for the selected device. A
description of the selected operation is shown in the Description
field.
5. Select GPS software upgrade and click Next .
The GPS Software Selection window appears. This screen
prompts you to select the software that you want to install on
the receiver.
6. Select the latest version from the Available Software list and
click
Next .
The Settings Review window appears. This screen prompts you
to connect the receiver, suggests a connection method, and then
lists the receiver configuration and selected operation.
7. If all is correct, click Finish .
Based on the selections shown above, the Software Upgrade
window appears and shows the status of the operation (for
example,
Establishing communication with the Trimble R8. Please wait ...)
8. Click OK .
The Software Upgrade window appears again and states that the
operation was completed successfully.
9. Click Menu to select another operation, or click Exit to quit
WinFlash.
10. If you click Exit , another screen appears asking you to confirm
that you want to quit WinFlash. Click OK .