Tandberg Data SDLT 600 - Manual (Page 23)

SDLT 600 Product Manual Chapter 2: SDLT 600 Tape Drive Product Information
81-81184-02 REV A01 March 2004 2-5
2.4 Modular Design
The SDLT 600 tape drive is designed as a total system. The system includes a complex interaction of a
number of important components including such items as the tape path, tape heads, media, data
cartridge, and host interface.
As shown in Figure 2-2 on page 2-5 , the SDLT 600 tape drive consists of five distinct modules:
• Data Control Module (DCM)
• Tape Control Module (TCM)
• Front Panel Module (FPM)
• Electronic Interface Module (EIM)
• Super DLTtape II Data Cartridge (Data Cartridge).
The modular concept makes the SDLT 600 tape drive system easy to manufacture and configure. Each
module is optimized to perform a specific set of functions and designed to interface with the other
modules in a well defined and flexible manner.
The following subsections provide a brief overview of each module.
Figure 2-2. SDLT 600 Tape Drive Modular Design
N OTE : Despite the deliberate modularity of each module, with the exception of
the FPM, individual users should not “swap” modules. The FPM is the
only module that is field replaceable. Customer adjustments to the TCM,
DCM, or EIM will void the tape drive’s warranty.
DCM
TCM
FPM
Data
EIM ICM
EIM HIM
Cartridge