Tandberg Data SDLT 600 - Manual (Page 43)

SDLT 600 Product Manual Chapter 3: SDLT 600 Tape Drive Specifications
81-81184-02 REV A01 March 2004 3-15
3.3.2 Temperature and Humidity
The ambient operating environment for the tape drive may not exceed the limits shown in Table 3-18 .
(The specifications shown in the table are valid for both the internal and tabletop tape drives.)
3.3.3 Storage and Shipment
The ambient storage and shipment environment for the tape drive may not exceed the limits shown in
Table 3-19 . (The specifications shown in the table are valid for both the internal and tabletop tape
drives.)
Table 3-18. Temperature and Humidity Specification
Specification Operating Limits
Non-Operating Limits
(Power On, No Tape Loaded)
Wet Bulb Temperature 25 °C (77 °F) 25 °C (77 °F)
Dry Bulb Temperature
Range 10
°
C to 40
°
C (50
°
F to 104
°
F) 10
°
C to 40
°
C (50
°
F to 104
°
F)
Temperature Gradient 11
°
C (20 °F)/hour (across range) 15
°
C (27 °F)/hour (across range)
Relative Humidity 20% to 80% (non-condensing) 10% to 90% (non-condensing)
Humidity Gradient 10%/hour 10%/hour
Table 3-19. Tape Drive Storage and Shipment Specifications
Specification*
Storage
(Unpacked or Packed)
Shipping
Wet Bulb Temperature 46 °C (114 °F) 46 °C (114 °F)
Dry Bulb Temperature –40
°
C to 66 °C (–40 °F to 150 °F) –40 °C to 66 °C (–40 °F to 150 °F)
Temperature Gradient 20 °C (36 °F)/hour (across range) 20 °C (36 °F)/hour (across range)
Relative Humidity 10 to 95% (non-condensing) 10 to 95% (non-condensing)
Humidity Gradient 10%/hour 10%/hour
* Note that these specifications apply to the tape drive only. Media specifications are listed in “Recording
Media Specifications” on page 3-16 .