Tandberg Data SDLT 600 - Manual (Page 37)

SDLT 600 Product Manual Chapter 3: SDLT 600 Tape Drive Specifications
81-81184-02 REV A01 March 2004 3-9
3.2.2 Shock and Vibration Specifications
The following tables provide non-operating and operating shock and vibration specifications for the
SDLT 600 tape drive system.
Table 3-11. Non-Operating Shock Specifications (Unpackaged)
Shock (Unpackaged)
Pulse Shape Square wave ½ sine pulse
Peak Acceleration 40 G 140 G
Duration 10 ms (180 inches/second) 2 ms
Application X,Y,Z axes, twice in each axis (once in each direction)
Table 3-12. Non-Operating Shock Specifications (Packaged, Drop)
Shock (Packaged,
Drop) Height
of Drop Number
of Drops
Package Weight
Drop 42 inches 16 drops total 0 lbs. < package weight
≤
20 lbs.
36 inches 16 drops total 20 lbs. < package weight
≤
50 lbs.
Table 3-13. Non-Operating Vibration Specifications (Unpackaged)
Vibration (Unpackaged)
Type Sine Sweep
Frequency Range 5 to 500 to 5 Hz Upward and downward sweep
Acceleration Level 0.02" DA
1.0 G Between 5 and 31 Hz (crossover)
Between 31 and 500 Hz (crossover)
Application X,Y,Z axes Sweep rate = ½ octave/minute
Type Random
Frequency Range 10 to 500 Hz
Acceleration Level 2.0 G
PSD Envelope
0.008 G
2
/Hz
Application X,Y,Z axes Sweep rate = 60 minutes/axis