Tandberg Data SDLT 600 - Manual (Page 32)

Product Specifications SDLT 600 Product Manual
3-4 March 2004 81-81184-02 REV A01
3.1.3 Physical Dimensions and Weights
Table 3-3 provides physical dimensions for the SDLT 600 tape drive system.
Table 3-4 shows the weights of the SDLT 600 tape drive.
3.1.4 Compression
The tape drive contains on-board hardware to compress and decompress data using a DLZ algorithm.
The default setting for data compression is on.
Table 3-3. SDLT 600 Tape Drive Physical Dimensions
Internal Version Library Version Tabletop Version
Height 82.55 mm (3.25 in.) without front bezel
85.73 mm (3.38 in.) with front bezel
82.55 mm (3.25 in.) without front bezel
85.73 mm (3.38 in.) with front bezel
164.46 mm
(6.48 in.)
Width 146.05 mm (5.75 in.) behind front bezel
148.59 mm (5.85 in.) with front bezel
146.05 mm (5.75 in.) behind front bezel
148.59 mm (5.85 in.) with front bezel
174.75 mm
(6.88 in.)
Depth 203.20 mm (8.00 in.) from back of
front bezel
215.40 mm (8.48 in.) including front
bezel
203.20 mm (8.00 in.) from back of
front bezel
212.22 mm (8.36 in.) including front
bezel
320.04 mm
(12.60 in.)
Note: Mounting hole pattern for the bottom and sides of the system is industry standard.
Table 3-4. SDLT 600 Tape Drive Shipping Weight
Internal Version Tabletop Version
Weight* 2.38 kg (5 lbs. 4 oz) 6.27 kg (13 lbs. 13 oz)
Shipping Weight* 3.77 kg (8 lbs. 5 oz) 9.90 kg (21 lbs. 13 oz)
* Weights depend on configuration. The packaging used may change the shipping weight.