Tandberg Data SDLT 600 - Manual (Page 78)

Updating the Firmware SDLT 600 Product Manual
5-4 March 2004 81-81184-02 REV A01
5.3.1 Update the Firmware Using the SCSI Bus
Quantum provides upgrades for product software and firmware that may be newly developed. These
updates are available on Quantum’s web site.
N OTE : These tools are only available to registered Quantum customers.
Refer to the following procedure to access and download these updates.
1. Go to the Quantum web site: http://www.quantum.com.
2. Click SERVICE AND SUPPORT in the upper menu bar. This opens the Service and Support window.
3. Explore the various pages that comprise Service and Support until you find the update you need.
4. Download the DLTSage package and refer to that tool’s built-in online help for detailed
instructions to use while updating the firmware.
5.3.2 Create a CUP/FUP Data Cartridge
To update your tape drive firmware you may create a CUP/FUP data cartridge from the update
information found on Quantum’s web site.
N OTE : These tools are only available to registered Quantum customers.
Refer to the following procedure to access these updates for creating a CUP/FUP data cartridge.
1. Go to the Quantum web site: http://www.quantum.com.
2. Click SERVICE AND SUPPORT in the upper menu bar. This opens the Service and Support window.
3. Explore the various pages that comprise Service and Support until you find the update you need.
4. Download the DLTSage package and refer to that tool’s built-in online help for detailed
instructions about how to create the data cartridge.